REVESTECH DRY50 Shower film

The complete system consists of:

The REVESTECH ® DRY50 film in a glued installation with a suitable adhesive cement.
- The flooring or cladding on the REVESTECH ® DRY50 sheet glued with the same adhesive cement.
- A specific treatment of the singular points appropriate to the function sought: waterproof protection.

Fields of application

This procedure is applicable for new construction and renovation of both floors and walls.

Supports envisaged

- Masonry supports.
- Cement-based mortars.
- Gypsum and anhydrite surfaces.
- Concrete and cellular concrete.
- Plasterboard
- Two-component waterproofing.
- Ceramic tiles

Usage destinations

- Public and private showers and toilets.
- Saunas and humid environments.

REVESTECH ® DRY50® film

REVESTECH ® DRY50 film consists of a double sheet of co-extruded thermoplastic polyolefins and coated on both sides with non-woven polyester fibres to facilitate better adhesion with the cementitious adhesive during installation.

Other features

- Yellow with REVESTECH ® DRY50 printed on one side.
- Weight : 330 gr./m2 ± 10 %
- Chemical stability: resistant to products normally used with ceramic coatings.
- Physical stability at temperature : softening at 60º C
- Water permeability of the film: 24 h 10 Kpa
(UNE-EN 1928 B) - watertight.